PRO STUDIO ELECTRO POLISHING LINE

PLATING SALES

dotcom
Home | Chrome | Anodizing | About Us  
   
SITE  MENU  
Home  
Chrome Tank Plating  
Anodizing Studio  
Commercial Lines  
Tank Plating  
Plating Plastics  
Electroless Plating  
Used Equipment  
Brush Plating  
Electropolish  
Buffing Equipment  
Contact Info
About Us
 
 
 

 

 

ELECTROPOLISHING PRO STUDIO LINE FOR SMALL MACHINE SHOPS

 Electro-polishing tank for electropolishing stainelss steel and electropolishing machined aluminum

CALL FOR MORE INFO AT:

CALL US AT  631-236-9691 

BACK TO COMMERCIAL LINE INDEX

SEE ELECTRO POLISHING KIT PRICING

Setting up a Pro Studio or commercial electro polish line can help any machine shop that fabricates aluminum or stainless steel control their own quality and lead time.  It will also help the shop save a fair amount of cost in the long run.  Outsourcing your electropolish work involves paying someone else $75-$100 per hour as well as shipping cost.  You can do this yourself for pennies on the dollar and control how much care and quality you require in your final product.

Illustrated here is an example of a small electropolishing line as it would appear in a machine shop application.  Shown above is how an electropolish tank would be set up with a corrosive resistant commercial heater, three bus bars, cathodes, and air agitation tubing at the bottom.  Show below is an electrocleaning tank before the cathodes have been installed.

Electrocleaning tank in an electropolish line for cleaning parts before the electropolishing process

An electropolishing Pro Studio Kit, as shown below, can produce as good or better finish as compared to outsourcing your work.  These are your parts and you will take more care in doing your electropolishing than anybody else will.  The line is very simple and can be set into use in a small corner of your existing shop.  This line below only takes up a 10 ft by 6 ft footprint.

Wide angle os an electro polish line that can be used to elctropolish machined aluminum and electro polishing of stanless steel

We can ship you an electropolishing line in any size up to a 7000 gallon electropolish tank.  We sell electropolishing rectifiers and anything else that applies to this process.  We also offer a PASSIVATION ONLY line.

Electropolish can be done effectively on stainless steel and machined and billet aluminum,  electropolish process is very simple and fairly easy to do

 

BACK TO COMMERCIAL LINE INDEX

SEE ELECTRO POLISHING KIT PRICING

 

 
Home | Chrome | Anodizing | About Us  © Copyright 2005 Plating Sales Inc.